-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
thoner7's latest activity
-
thoner7 replied to the thread A/C Diagnostic help.I think you’re onto something. Because if I cycle the AC off then immediately back on, it blows again. I’ll have to figure out... -
thoner7 replied to the thread A/C Diagnostic help.So the last issue I am having with my AC, may not be an issue at all. It pertains to the rear evaporator like in the 1165 and 1151. It...
-
thoner7 replied to the thread A/C Diagnostic help.Well I went to Lowe’s and bought a 3/4” Pex B valve that works perfectly. So the one from rock auto I bought must be defective. PS Pex...
-
thoner7 replied to the thread A/C Diagnostic help.So are you saying mines on the wrong hose or on the wrong side of the elbow? I installed it exactly where the other one was, but I’m...
-
thoner7 replied to the thread Hot & Cold air simultaneously from fron A/C vents.Like blowing on it? Good idea, but I did not. But I did notice it was a strange valve in general. My post from another thread...
-
thoner7 replied to the thread A/C Diagnostic help.It’s the value in my post 66. Maybe it needs to be banded all the way closed? Idk- but as is it doesn’t work. Bought it from rock auto.
-
-
thoner7 replied to the thread A/C Diagnostic help.I installed my valve. No cable yet. But it seems to let fluid through, even when shut. I stupidly ordered thenone At idle, My front...
-
I noticed something very similar to that on mine too.
-
I think it is normal since the push pull cable will only activate the valve a 1/4 turn. Some have a "stop" detent built into the valve...
-
thoner7 replied to the thread A/C Diagnostic help.I received my valve in the mail. Is it normal for the thing to go past its “full open” and then restrict flow again? One pic is the...
-
-
thoner7 replied to the thread A/C Diagnostic help.I’m pretty sure there are clamps there already. Holding in the valve that went bad.
-
thoner7 reacted to spankybear's post in the thread Hot & Cold air simultaneously from fron A/C vents with
Like.
I used the one from rock auto on my M997A2 and it work fine. It looks just like what was replaced. You can use this on the A/C trucks... -
thoner7 replied to the thread Hot & Cold air simultaneously from fron A/C vents.Did that one work with the cable? I still need to replace mine with the manual cable style. someone else had tried a cheaper valve...
-
thoner7 replied to the thread Hot & Cold air simultaneously from fron A/C vents.Read the posts from here on. There’s a 35$ ball valve replacement too...
-
thoner7 replied to the thread M1167 A/C trouble shooting.Im attaching an Air Conditioning manual that I found in another thread. I have either insufficient or intermittent cooling. I...
