-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
timberrrrrr's latest activity
-
Ttimberrrrrr replied to the thread 802a power output issues.Thank you for all of your help, this is all excellent information. Unfortunately it is raining pretty good here, will have to wait a...
-
Ttimberrrrrr replied to the thread 802a power output issues.Got it, thank you! Gotta work today, wind came through and tore a couple of trees apart Hope to get home with enough sunlight to check...
-
Ttimberrrrrr replied to the thread 802a power output issues.OK, I opened up the generator again this afternoon and thoroughly soaked all openings / terminals 4 times while working the switches...
-
Ttimberrrrrr replied to the thread 802a power output issues.I wasn't sure what voltage it is seeing. I will order the 14d151k resistor, thank you Thank you for your reply That is where I...
-
Ttimberrrrrr replied to the thread 802a power output issues.I cleaned the am/vm and ac selector switches the best I could with Deoxit and excercised the switches lots. unfortunately the generator...
-
-
Ttimberrrrrr replied to the thread 802a power output issues.is 14d151k the resistor needed for the MOV Mod I think this is a 95 volt resistor, shouldn't we use a 120 volt resistor?
-
Ttimberrrrrr replied to the thread 802a power output issues.Good suggestion, I will try that. I don't notice any unusual deposits or sludge outside of the exhaust. I will work on it and report...
-
Ttimberrrrrr replied to the thread 802a power output issues.Makes sense, I don't use the convenience outlet, so probably doesn't matter there isn't a fuse. If some droop shouldn't cause an...
-
Ttimberrrrrr replied to the thread 802a power output issues.Thank you for the intel I will report back my findings
-
Ttimberrrrrr replied to the thread 802a power output issues.OK I did some reading, have a few more questions . . . If the droop is adjusted wrong, will it prevent the generator from giving full...
-
-
Ttimberrrrrr replied to the thread 802a power output issues.Thank you all! I've got some reading to do . . .
-
Ttimberrrrrr replied to the thread 802a power output issues.Thank you for the replies, good info! I ordered some deoxit today, and will report back when it arrives and I try it out. How do I...
-
THey folks I've got an 802a generator about 2500 hours It has never given the rated power output. It is usually happy at about 2,000...
