Recent content by usmcr55

I picked up an M1008 and M1009 from GL at Barstow, CA. in July of 2010. A GL person loaded the vehicles on a trailer for me, using a forklift. This person carefully blocked each vehicle so that the forklift was bearing only on the vehicle's frame. During my preview of these two vehicles (before...

Anyone with data on the difference between the steering wheel on an M35A3 (P/N RCSK17043) and the steering wheel on an M35A2 (P/N 7521474)? I need a replacement for my M35A3. Don.

M35A3 date of manufacture Although you apparently were unable to provide the "Date of Manufacture" which is what I truly needed, I have gladly made a donation. Thanks for the service you provide to so many. Don

I am particularly interested in the date of manufacture, so that I can apply for an SF-97. a. Identification No. 505275 b. Registration Number None found c. NSN 2320013832047 d. This M35A3 ESP 2 1/2 Ton Truck was bought from GL at Barstow, CA e. Bumper Numbers Front passanger's side 153F2180...

jesusgatos, Here is info from DA FORM 461-5 Vehicle Classification Inspection that was left in the cab. Following items to be replaced: F/Shackels Chain Covers Wiper Blades & Washer Oil and Fuel Gages Driver's Seat Radiator Hoses Drive Belts 3 Marker Lights Front Axle CV Boots Hand Break -...

Thanks Guys for the inputs. I went down to my local Cat dealer today and was informed that it is indeed the Crankcase Breather. The bottom portion is made to mount a fuel filter. The left port would normally go to the Governor Assembly, while the right port would go to the rear of the cylinder...

Just got our first Deuce, an M35A3. It looks like we're missing a part(s). Looking at the photo can anyone tell me if somthing is really missing and if so, what it is (a filter?). From what I believe is the crankcase breather. TIA. Don AK6F

On Thursday 9-17-09 successfully got my M35A3 home!!! Don AK6F

I would like to thank everyone for their inputs. I have found another towing service that says they can do the job. We're on for tomorrow, Yea! Stay tuned for the outcome and thanks again. Don AK6F

I was supposed to get my M35A3 from Barstow today (9-15-09). I gave the towing company a week's notice of the pickup date and time. I allowed 2 hr. for loading. The GL folks waited with me an additional 15 minutes past closing, but the driver did not make it! I tried to re-schedule with the...

Mike, Suggest you start here. http://www.arrl.org/ Then find a local Amateur Radio club. Don AK6F

Good Job! Mine was delivered three days ago from Red River Army Depot. Unfortunately it turned out to be an M101A3 box on an M116A2 chassis. I guess that's the risk of buying sight unseen and being green to boot!! I thought I was buying something that would match up with my HMMWV. Question for...