• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by wrenchturner6238

  1. wrenchturner6238

    Hello from Oklahoma

    Welcome from the Panhandle of Oklahoma
  2. wrenchturner6238

    Solution to M1031 generator control system using b4thundr Woodward Apecs controller

    I have been wondering this myself. I have tried to pm b4thundr but have not heard anything as of yet
  3. wrenchturner6238

    I’m new to ss. This is my m54a2

    Nice looking truck! Welcome from Oklahoma
  4. wrenchturner6238

    M939 manuals.

    I found a 4 volume set of hard copy ( they are copies of the original) manuals on ebay that I bought recently not sure if still there. They come in 3 ring binders seem to be a good option
  5. wrenchturner6238

    Heater fresh air tube

    i just found the nsn# 4720-00-809-2430
  6. wrenchturner6238

    Heater fresh air tube

    I am looking to find out what others are using for the fresh air tube
  7. wrenchturner6238

    Heater fresh air tube

    This is a m931 tractor by the way
  8. wrenchturner6238

    Heater fresh air tube

    I am trying to find a new under hood heater fresh air tube. Any help would be appreciated. As you can see my tube is just went south. I have tried the search with no luck. I suppose that I am not using the proper words
  9. wrenchturner6238

    R.I.P. - David "MWMULES" Christenberry

    Rest in peace
  10. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    If your fuel level was low while you were doing that it sure could uncovered the stand pipe to introduce air into the system. If that possibly the case. The answer is keep more fuel in the tanks. Don't stop doing donuts sometimes. Lol.
  11. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    I am glad you were able to get your engine running with no other issues so far. If you truck does this again you are probably bringing in air on the suction line.
  12. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    This is just my opinion but I would not tare anything down until you can verify that you have the system primed up( getting returns into the fuel tank while priming the system) and the engine still doesn't start. this doesn't cost much in the scheme of things. If you have a psi gauge (80 or...
  13. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    You are correct you have a fuel problem. You should have some fuel run out after cranking for a bit if it were primed properly. You may also have other issues like a stuck injector or something of that sort but with the smoke getting less and less confirms not the proper fuel to the engine.
  14. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    How they use it on the cummins is different than how I would use it on yours because they use the suction to draw the fuel up the suction line of the pump. On yours you need to force the air out of the heads and injectors
  15. wrenchturner6238

    8V92 Coughs but Won't Start (SOLVED!)

    To be honest I don't know if it would work or not. It might work I just am not sure. Because you do need to build a little psi to prime Because of the clearance in the fuel lift pump. Years ago I did use a tall thumb pump oil can with a hose on it to prime an engine. On my m931 there is a hand...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks