nextalcupfan
Well-known member
- 348
- 506
- 93
- Location
- NW Missouri
Just got the measurements.
0.0-0.1 Ohms between the gauges
![PXL_20220228_215301504.jpg PXL_20220228_215301504.jpg](https://www.steelsoldiers.com/data/attachments/615/615638-ffa29f4ce2e7da7e0c06bd2b0b3d0c1b.jpg)
![PXL_20220228_215304624.jpg PXL_20220228_215304624.jpg](https://www.steelsoldiers.com/data/attachments/615/615637-cfc50b79212216f70ba781a3383b0674.jpg)
0.1-0.2 Ohms between the gauges and main panel ground
![PXL_20220228_215327463.jpg PXL_20220228_215327463.jpg](https://www.steelsoldiers.com/data/attachments/615/615639-96c98167ae6ae49e1005a3c533c96068.jpg)
![PXL_20220228_215335896.jpg PXL_20220228_215335896.jpg](https://www.steelsoldiers.com/data/attachments/615/615640-4e99dbf992ce7784377c5ea5c207789e.jpg)
5.3 Ohms between the main panel ground and main engine ground
![PXL_20220228_215526801.jpg PXL_20220228_215526801.jpg](https://www.steelsoldiers.com/data/attachments/615/615641-5bdb3c43c6d9ca9f58a6bf70ed74d6b8.jpg)
I did more measurements than what you asked because IMO its not as important between gauges as it is for the entire circuit.
You can have perfect continuity in your gauge panel but if the wires/connections are bad going TO or FROM the batteries nothing is going to work.
0.0-0.1 Ohms between the gauges
![PXL_20220228_215301504.jpg PXL_20220228_215301504.jpg](https://www.steelsoldiers.com/data/attachments/615/615638-ffa29f4ce2e7da7e0c06bd2b0b3d0c1b.jpg)
![PXL_20220228_215304624.jpg PXL_20220228_215304624.jpg](https://www.steelsoldiers.com/data/attachments/615/615637-cfc50b79212216f70ba781a3383b0674.jpg)
0.1-0.2 Ohms between the gauges and main panel ground
![PXL_20220228_215327463.jpg PXL_20220228_215327463.jpg](https://www.steelsoldiers.com/data/attachments/615/615639-96c98167ae6ae49e1005a3c533c96068.jpg)
![PXL_20220228_215335896.jpg PXL_20220228_215335896.jpg](https://www.steelsoldiers.com/data/attachments/615/615640-4e99dbf992ce7784377c5ea5c207789e.jpg)
5.3 Ohms between the main panel ground and main engine ground
![PXL_20220228_215526801.jpg PXL_20220228_215526801.jpg](https://www.steelsoldiers.com/data/attachments/615/615641-5bdb3c43c6d9ca9f58a6bf70ed74d6b8.jpg)
![PXL_20220228_215542936.jpg PXL_20220228_215542936.jpg](https://www.steelsoldiers.com/data/attachments/615/615642-ba52669cabe6eba58ece1485f802806f.jpg)
I did more measurements than what you asked because IMO its not as important between gauges as it is for the entire circuit.
You can have perfect continuity in your gauge panel but if the wires/connections are bad going TO or FROM the batteries nothing is going to work.