Plow mount from an H1?

Anyone know if a snow plow frame mount from an H1 will bolt up on a 998/1097 (or any of the short nosed/non ECV trucks)? Looking at the Meyer plow mount specifically. It looks like it would, my truck is an ECV though so I don't know for sure. I already have a Meyer plow, a bunch of spare parts, and a boy who wants his own truck to mess around with

Just to update this in case it helps anyone else in the future.. I bought the Meyer H1 plow mount. The holes are all there on my ECV to mount it, however the clevis that attaches to the plow would be too far back under the nose of the truck to work. So it will only work on non-ECV trucks. The bars protecting the brake rotors will have to come off (must not be on an H1, not mentioned in the instructions) but it won't matter as the plow mount will hang lower and protect the brakes.

One more update.

It works! The bars protecting the brake rotors have to come off but the bars going back to the crossmember will protect the rotors. Speaking of said crossmember, the holes that mount those brake rotor protection bars are in a different location than the H1 skid plate holes, so you do have to either drill a new hole in the plow mount or the truck crossmember to mount rear brace. The only other modification needed is the front tie down loops/tow hooks have to come off. I cut one tie down off with a grinder before I realized they could just be unbolted.