• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Dual Circuit Brake Engineering Thread

cbforme

New member
1
2
3
Location
natrona heights pa.
I just inquired my 88 Air Force truck. I have split brakes as well. Having a hard time finding any parts whatsoever for the split brake system. Do you have any idea where I could find a master cylinder rebuild kit for a post that has some info listed?
Check sweeting performance look at bosh / bendix hydro-max they sell air force style with the reserve and the a3 version with the remote reserve. not cheap but give it a look.
 

DUUANE

Active member
Steel Soldiers Supporter
474
241
43
Location
Qualicum Beach BC
Page 15 of this thread has a reply from rusty that says around 800psi, checked by gauge. Glad you asked, I was curious too.
Thank you very much for pointing me to that. There is so much info on these forums, but alas...for some reason i totally suck at the search.

800psi..is both good and surprising. I woulve thought it to be in the 12-1500psi range for sure. This is good news though and greatly simplifies things for what i want to try in another thread. Will make packaging much simpler.🙂👍
 
Top