• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M998A1 wheel hub question

trooper632

Member
535
5
18
Location
Utopia, TX
Hey all, I'm lost on this. I noticed that I had a leak at the front right wheel area, noticed a (what i though was a rubber brake line going into the top of the drive hub), The liquid was red also noticed that all 4 wheels have the same line going into the hub, power steering fluid was low so guess it was power steering fluid, but why does power steering fluid go to the hub whats the reason for it,
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,188
10,062
113
Location
Papalote, TX
You possibly have a bad cooler loop in the transfer case and the transmission fluid is flooding the vent system (the hose you talk about)
So you could possibly have "contamination" in some or all of the hubs and differentials.
Check the fluid level in the TC and see if it is over full.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks