Upgraded MEP-802A Digital Control Box Assy, Gen II

My gen set has a Eurotech Windows XP based Digital Control Box Assy. DRS Fermont Model #: 958-02-01

Do you know how I can get an operations TM/TO that covers this interface? The MEP-802A NSN: 6115-01-274-7387, is identical mechanically and I do have the normal TM for the 802A.

This unit has a Control Box Assy that has been Upgraded to the "Digital Gen II" control, so a set-up sheet, or programing details would be awesome.

It had been functioning until today when out of the blue during start up, it displayed a warning screen that stated that the "Password needed to be changed".

There is no way to interface with the unit via it's front panel buttons to do this. It may need an Ethernet connection and laptop with a program to make the changes.

Any help ideas?

If the control box is changed, the gen set should have a new data plate and or NSN. Can you take a picture of it and post it?

You have one of the handful of retrofitted units that @Dewie38 might be able to help you with. Also @jamawieb has some experience with these retrofitted units.

Excellent; thanks for your help sir!

Send some pics of the actual controller display. Ive personally never seen the DRS data tag. All the units Ive messed with do not have that tag.
The controller should be an EasyGen 2500. You can google that and get all the manuals. The ones I have worked on and my personal all used the factory default password that is in the manual. I cant remember what it is but I think 1111