DavidWymore
Well-known member
- 1,621
- 197
- 63
- Location
- El Centro, CA
Needs tires too.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Too far gone? 800 series dump truck
- Thread starter DavidWymore
- Start date
- 10,687
- 7,090
- 113
- Location
- Camp Wood/LC, TX
I’ve built back much worse. PTO with rear facing shaft is a bit tricky to source.
- 2,725
- 2,329
- 113
- Location
- Sunman Indiana
Heck no! If the price is right? Thats all easy stuff, consider yourself lucky you don’t live in the rust belt...
- 200
- 79
- 28
- Location
- Abilene, Texas
The steering wheel looks great! It has a gear shift knob too.
- 2,774
- 8,999
- 113
- Location
- Alexandria, La
That'll buff right out...
- 8,655
- 3,017
- 113
- Location
- Monrovia, Ca.
Looks like a project fer shur! I know where there are some doors, possibly a PTO, a complete dash, maybe a starter. Wonder why the fan hub was removed? At least the pump is still there! I do see a couple of holes open to atmosphere.
US6x4
Well-known member
- 1,270
- 2,348
- 113
- Location
- Wenatchee, WA
Looks like the throttle linkahe is missing; swapping a complete Cummins KTTA will fix this problem.
msgjd
Well-known member
- 1,191
- 3,658
- 113
- Location
- upstate ny
as long as none of the dump equipment is missing and the hoist pistons aren't bent or otherwise broke, all the rest will just keep you off the street corner for awhile .. Also, check the condition of the welds and crossmembers along the rear area of the bed above the hinges .. They are known to break apart back there due to rot in that area, or also overloading at the front of the bed
- 8,655
- 3,017
- 113
- Location
- Monrovia, Ca.
I don't think that'll fit! If it could fit, do a 750!
DavidWymore
Well-known member
- 1,621
- 197
- 63
- Location
- El Centro, CA
I’ve been looking at this truck for 20 years. It’s within dragging distance.
I run a large machine and welding shop, dump stuff no prob. A dump would be handy for my side work of tree removal. Dump 6’ off the ground not as good, haha! Maybe smol tires.
I’m a deuce guy, so little learning curve. Not much
Semi powertrain mech exp.
Reg and ins in SoCal, I shudder to think…just did deuce.
parts?
I run a large machine and welding shop, dump stuff no prob. A dump would be handy for my side work of tree removal. Dump 6’ off the ground not as good, haha! Maybe smol tires.
I’m a deuce guy, so little learning curve. Not much
Semi powertrain mech exp.
Reg and ins in SoCal, I shudder to think…just did deuce.
parts?