• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. HN6

    Deuce Rough Terrain Limitations

    Lockers, power steering of some sort, super singles. the big buggies here where I live all run 2 steer axles, meritor hubs and 50-60'' ag tires, completely different game. Depends what you want. I like the 3 axles and some weight, safer in deeper river water.... pic of 5 ton stuck on that...
  2. HN6

    Starter solenoid issues...

    Mine has been removed. I also ran jumper directly from battery to solenoid to check.
  3. HN6

    Starter solenoid issues...

    Have had issue with starter/solenoid for 2 years. I believe my solenoid is dead. I have removed multiple times, cleaned, bent tested and always works great for few weeks after reinstalling. this time it is not even a click or anything. Can I just replace the solenoid with one from Napa? If...
  4. HN6

    first broken front axle shaft

    Interesting.. 1968
  5. HN6

    first broken front axle shaft

    Yes, I could still drive fine. Just no power to wheel with front diff engaged. I have a locker in the front so I jacked up front end and spun tire freely without opposite side spinning as well which meant shaft was broken. Jack shaft from broken side removed and put all back together and...
  6. HN6

    first broken front axle shaft

    that was the past year and half. Probably did the damage then and it just now finally broke while I was treating it nice.
  7. HN6

    first broken front axle shaft

    I wish. Then I would know why. I was actually going about 3mph creeping thru about 30'' of snow, low rpm and heard the pop with window down.
  8. HN6

    first broken front axle shaft

    395's , a3 wheels
  9. HN6

    first broken front axle shaft

    Broken driver side front axle (long side) on the spline. chunk still in the Yukon locker. removed stub and will eventually get the other piece out. Maybe I will upgrade to the Ouverson shafts/hubs on the front since that is what does 70% of the work off-road. I was barely even moving, in the...
  10. HN6

    M35a2 NV4500 Conversions?

    I agree. I vote that you do the swap and go run thru the rounds on hwy and off-road and give me the report! Im not being sarcastic either.
  11. HN6

    M35a2 NV4500 Conversions?

    One person on here did it a few years back. I have one sitting in my shop on the floor. Most people I ask that know more than I do say they won't hold up in the M35.
  12. HN6

    Removing, rebuilding, reinstalling Hydraulic Head

    Thanks for the PDF! Excellent job!
  13. HN6

    Daryl’s Deuce Resto

    great work!
  14. HN6

    torque rod bushings

    Actual real world experience Perfect! Thanks for the feedback. Greatly appreciated.
  15. HN6

    torque rod bushings

    Thanks, I only plug welded the center with about 5/8' hole. When I replace the bushings and weld new keepers I will make the plates better and weld some outside edge as well. Hopefully to last a lifetime. I did not want to quench them in the water as to change the molecular structure and...
  16. HN6

    torque rod bushings

    I busted one of my welded on keepers off my torque rod bushings on my last backcountry trips and rod came completely off. couple chain falls and sledge got it back on the welded plate back on. Luckily I Brough the welder and generator and caught the problem before I ventured further off road...
  17. HN6

    torque rod bushings

    I used a steel wedge cut out of 3/4' steel. beat it in to seperate from frame. worked good.
  18. HN6

    torque rod bushings

    ATV's can/t get past the 2 rivers. There will probably be other hunters back there as well if a real dire situation happened or call a plane to pick me up. Get expensive fast.
  19. HN6

    torque rod bushings

    Moose hunting Sept 1. Not to far away. I figured I would just take 110 stick welder and generator with me. if one happened to break out I could just weld it back on. Maybe I will take a spare bone in the parts box.
  20. HN6

    torque rod bushings

    for know I will go with he welded keeper Taking 2 trucks. Walking is way better no way I could ride a bike and 2 decent river crossings.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks