Search results

I have 4" Rough Country lift springs front and rear. 1" zero rates in the rear. The Dana 60 spring perches sit about 3/4" taller than the 10 bolt. So, all and all I'm at about 5" of lift. The Rough country springs live up to their name. They are very rough. I plan on adding longer springs...

Maybe down the road. It would be pretty easy to add.

So far, here is how my M1009 is equipped: 6.2L with Banks Turbo TH400 w/ NP208 Dana 60 front w/ 4.56 gears, open dif 14bolt ff w/ Detroit Locker Sky Manufacturing crossover steering 36" IROK Super Swampers I still have lots of plans for this truck:beer:

Next was dropping the 14bolt out of the 1008 in to my garage and giving it a once over. It needed the fluid changed, but the rest of it looked great. I cut the spring perches off and cleaned up the tubing so the perches can be relocated when I do the install. For those who don't know, you...

I came back from the field to a dead 1008. It would crank just fine, but the only thing I got was fuel rich smoke out the tailpipe. The only way I got the truck running was using the newly acquired swingfire heater. I let her run for maybe 10min and the truck fired right up. Come to find...

Well, its been a while since my last update on the truck. I'm back in Afghanistan, again. I left off with the D60 rebuild. That beautiful thing is finished, for now, and mounted on the truck. The next obstacle to tackle was the crossover steering. I didn't think anything of it until I tried...

Tore down the D60 all the way. The king pins had a lot of scoring on them. So everything got replaced. I found a lug nut that fit the king pin and a 3/4in drive impact and they came right out. The driver side gets a cap and the passenger side gets the new steering arm from sky...

The Sky crossover kit price is listed on-line. I have it all bolted on, but haven't had it on the road yet. Looks solid.

Thanks for all your input. I have been running Royal Purple 15w40, and have nothing bad to say about it. seems to work well. Just wondering if people were following the guidelines on the back of the visor. Good info/:beer:

Just throwing this out there. Why does everyone say to run 15w40 when the visor says 10w30. 15w40 is for turbo diesels, NO? I live in Alaska, and the visor advises to run 10w30 from 40 deg and below. Let me know your thoughts.[thumbzup]

Thanks for the tip. I'll look in to it.

well, another full day at the auto shop. with the help of a friend, we have been able to reinstall the newer engine and trans/t-case. spent the rest of the day hooking things back up. I did find out that the cross-members of the m1009 and 1008.s are not the same the m1009's is wider at the...

Well, decided to beef up my K5. I originally instaled a banks turbo on this rig, but the engine gave out. Picked up a couple of m1008's at auction, and am using one as a donor vehicle. I pulled the engine, trans, and t-case. They are going in the K5 along with the one ton axles. Stripped...

I have been spending a lot of time at the auto shop. Taking 1 of my m1008's and putting engine w/banks turbo, th400, np208, d60, and the 14 bolt in my m1009. I stripped down the d60, cleaned out the diff, new spicer u-joints, repacked all bearings. This is going to be a sweet truck. Just...

Yes, you can still get to the glow plugs.

Roadways are the most common ways to move about in the US. So i would vinture to say that the largest state in the Union would have a couple of roads. I would say that every dime i spent on the kit was worth it.

I don't think it gets any easier than drilling two holes in the civilian bettery tray and bolting on the ram air. I found the trays at a junk yard and they bolt right in as well. To easy. As for the oil return, Banks has a plate that replaces the plate behind the lift pump. The new plate has a...

The install took me approximatly 3 days. I got myself a nay with a lift at the auto shop on base. Banks gives good instructions, but having never done anything like this before it took me a while to figure some things out. The manifold bolts came out rather easy, after soaking them with PB...

here are a few pics from the install. the ram air box mounts directly to the civilian battery tray. so you will have to buy civi trays to install the system correctly. I was lucky and got the radiator over flow tank at the same time. Which you will also need. shoot me any ?'s you may have...

So far the power increase is awesome and I can now get out of my own way on the freeway. I was able to pick up my turbo kit with shipping to Alaska for $2169. Not bad if I say so. I will be monitoring the mpg over the next few months and will keep u posted. The gentleman I spoke with at Banks...