• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. aarron81

    M816 rear winch roller drain??

    i pumped at least 2 or 3 tubes of grease in mine and still have water coming out and the side rollers are seized up. got to find a way to free them up.
  2. aarron81

    1500 max rpm? nhc 250

    i had a similar problem when i bought my m816 wrecker. it wouldnt rev much over 1500 in any gear. turned out to be that when you engage the pto there is an air valve and some linkage under the truck that works a throttle stop on the pt pump so you dont over rev it while pto is on and the valve...
  3. aarron81

    Stubborn Starter Problems CUCV

    the proper way to ship a gm starter is to install it without any shims and measure between the starter gear shaft and the flywheel teeth. it should be an 1/8". i use a 1/8" drill bit or welding rod with the flux knocked off. just poke it up in there between the teeth of the flywheel and...
109,290members
164,274threads
2,311,811posts
658online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks