• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Y

    Self loading container trailer

    Thanx for the schematics that will really help. UPDATE: I jumped the “raise” solenoid with 24 volts while engaging the raise switch and the bed lifted as it should. So without looking at the schematics yet I believe the issue is a Hold down latch proximity switch or bad wiring for the switches...
  2. Y

    Self loading container trailer

    Been out of town working , just got back and looked at things closer. It is not fluid or stuck/rusted down. I loosened the hose at the lift cylinder and hit the raise button and no fluid shot out of the fitting so it has to be some interlock ( hold down latches..?) nothing lights up on the...
  3. Y

    Self loading container trailer

    I will check to see if it is rusted , it is one of the units from Hermosillo so it is very rust free but I guess anything is possible
  4. Y

    Self loading container trailer

    Hey guys need a little help with my trailer. Bought it 5 yrs ago or so , got it home started it ran the winch in and out and the hoist up and down . Now I pulled it out cause I need to move a container next weekend and the hoist will not go up. The hydraulics load up like it is by-passing...
  5. Y

    Schutt Industries 1CSL0-SLC-T-1000 Self Loading Trailer

    Gary2 welcome to the super cool trailer club!!! Unfortunately I still have not used mine except for around the yard just tinkering. I have not been able to register the trailer nor my M923 in this POS state so until that happens it doesn't get used much
  6. Y

    Was Broke down in Redlands Ca. Phoenix AZ to San Francisco 800miles

    Hey Nick02 my nephew took a pic of your rig when it was sitting in Redlands, wanted to know if i knew you. lol and now here is your story, small world. I am just at the top of Cajon pass north of Anaheim if you need any help let me know....
  7. Y

    Schutt Industries 1CSL0-SLC-T-1000 Self Loading Trailer

    No paperwork came with mine. I havent looked at it close enough yet to check lights and the hydraulic system but what i have seen so far is impressive they are so well done as far as the trailer. I did notice the radiator supports are a little weak and some rubbing taking place so i will address...
  8. Y

    Schutt Industries 1CSL0-SLC-T-1000 Self Loading Trailer

    mine is serial #31. they had 20 of them at the Yermo, Ca site. i took Artisan suggestion and read through all the posts and i don't believe this trailer was ever submerged in a flood. the flywheel does have rust but nothing bad. It has never been used and from what i saw the other ones didnt...
  9. Y

    Schutt Industries 1CSL0-SLC-T-1000 Self Loading Trailer

    I got my new trailer home on Wed. Pulled it home the bags aired up ok but the are really deformed from sitting empty so long. Put a battery charger on and tried starting it last nite but it would not fire. Started raining (unusual for so cal) so had to stop. What is the recommended glow plug...
  10. Y

    Roosa Master DB2 Problem

    thanks for the Help and support on this but i had to throw in the towel. I tried heat i tried an impact driver and still could not get the advance screw to budge. I was tapping lightly and then after about 4 beers was winding up pretty good and still nothing. sent it in and the let the guys...
  11. Y

    Roosa Master DB2 Problem

    I will get the proper size Torx, machine a bushing to center it and try it one more time. I am thinking I will be sending the pump to a shop (that someone on here recommends) for the flex ring repair.
  12. Y

    Roosa Master DB2 Problem

    m16ty hopefully the image loaded for the description of the vent wire screw. It has to come out before the head comes out. WOW cutting the body to get the cam advance screw out is crazy but I think you are correct it is in there really tight.... thought this was going to be easy. thanks for...
  13. Y

    Roosa Master DB2 Problem

    I became the proud owner of an Empire 50 kw with a White 2300T diesel with a Roosa Master DB2 IP. The flex ring failed and the check valve plugged with debris. I decided i wanted to attempt teh flex ring repair myself. I am having trouble getting the vent wire screw and the cam advance screw...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks