• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    Deuce Driveshaft Tube

    3" tube, .083" wall in case anybody else needs to know.
  2. D

    Deuce Driveshaft Tube

    That's the shaft I'm planning on using actually. Didn't know it was different from the ones coming off the transfer case. I knew the jack shaft going from the trans to the transfer case was different. Anyhow, I still need the size so I can order a 1350 tube yoke. Anybody know?
  3. D

    Deuce Driveshaft Tube

    Anybody know what size tube and wall thickness the military used for the driveshafts in the deuce?
  4. D

    I hate to ask, how do you get 14.00's to inflate on ODIron wheels?

    When I had my 16.00R20s mounted they tried a single canon and it didn't work, so they ended up using 4. That was after ratchet straps, a fork lift with a clamp for tires, and everything else they try in the shop.
  5. D

    Injection Pump Removal

    Parting the truck out. $100 for the IP is a lot easier than pulling the entire motor and trying to ship it.
  6. D

    Injection Pump Removal

    Like I said, I mulled over the manuals for hours. I guess I missed it in the hundreds of pages I looked at. Thanks for the help guys.
  7. D

    Injection Pump Removal

    Great. How big of an ordeal is that? This is my first go around with this motor.
  8. D

    Injection Pump Removal

    I have searched and looked through the manuals on the site, but either I missed what I was looking for or just couldn't find it. I am taking the injection pump off my M35 with a LDT-465-1C. All the lines have been disconnected and I believe all the bolts holding the pump to the block have been...
  9. D

    Aftermarket Gears

    Sorry bud, you're wrong there. While comp rigs may not use Rockwells, there are tons of them out there in the off road world.
  10. D

    Aftermarket Gears

    I searched to see if this had already been posted and didn't find anything, so I am sorry if this is a repost. This company makes some pretty interesting stuff, most notably the 5.41 gears for 2.5 tons. Pricey, but there are options available. I am not associated with these people or trying to...
  11. D

    I hate to ask, how do you get 14.00's to inflate on ODIron wheels?

    When I had my 16.00R20s mounted on my 20x11 MRW wheels the shop I went to used 4 Cheetah tanks and each tires still took several attempts. I suggested ether, but they couldn't without getting in trouble with their boss.
  12. D

    Rockwell Camber Issues

    RE: Re: Rockwell Camber Issues Toe in is right at 1/4"
  13. D

    Rockwell Camber Issues

    The off road guys love them. You can do your own "mohawk" with a few pieces of plate. I will dig up a link if you'd like. As far as the camber, this guy is running a 46" tire, I'm running a 48" tire, but I've seen plenty of guys with 52s or even bigger that didn't seem to have this problem...
  14. D

    Rockwell Camber Issues

    He has the housing flipped around to make it driver's side drop to match his transfer case. He swapped the knuckle side to side to get the tie rod behind the axle like it normally is. I have the same problem with my axle and the only welding done is the spring perches on top of the axle, which...
  15. D

    Rockwell Camber Issues

    This guy and I have the same problem trying to fix the camber on our Rockwells. I was hoping somebody here would be able to help. Here is a link to Pirate with details and pics on the problem. http://www.pirate4x4.com/forum/showthread.php?p=5630592&posted=1#post5630592
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks