Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
ATF only Per TM / GM I Figured It was strange as well that's why I posted it. I Might pick up a parts unit I will have a parts TH400 maybe someone Will trade.. I can hope anyways.
yep when a bearing spun on a shaft stack up a couple TIG beads and turn it back down, we didn't have any spray welding equipment unfortunately. I just don't want to affect any heat treatment that may have been done to the gear or splines, come to think of it I never checked if any of those...
The bench is stacked high to the left with other parts, I keep that 1/4 of the bench clean for projects. Being a Machinist and also a mechanic I have a little bit of the Keep things clean and orderly, I wish I never had piles of parts but I just don't have enough room to keep everything as...
I won't go into great detail about the story I will save that for the NV4500/M1009 Swap thread. If there is interest? (I did not want to fill that up with this question/Info) So after removing my NP208 for my trans swap. I pulled it apart to inspect bearings, gears and replace the seals and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!