• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. General Kaiser

    Transfer Case problem

    Hi Thanks a lot gringeltaube I will check it in next week. I'm far from truck for days.
  2. General Kaiser

    Transfer Case problem

    I'm still searching . But I think the fork is out of its place. Taking the hole unit out is challenging too!!😁
  3. General Kaiser

    Transfer Case problem

    Hello everyone Can I just take out front compounents of transfer case (like drive shafts and etc) and open front door for repair ? Thanks
  4. General Kaiser

    Transfer Case problem

    Thanks a lot !! I know English enough to understand technical text 😁
  5. General Kaiser

    Transfer Case problem

    Hi Where are snap rings that can cause the problem when missed ?
  6. General Kaiser

    Transfer Case problem

    Nothing wrong with them!! Everything looked like new except ball-bearings! After rebuild transfer case worked just fine with zero problems until I parked the truck for a while and when drove it again , I had noticed the problem. I think people who was intrested on truck and sat in the truck...
  7. General Kaiser

    Transfer Case problem

    Hi But I had opened the top 4 srews and cover and saw the fork was reach the end and contact transfer case body. Thanks
  8. General Kaiser

    Transfer Case problem

    Thanks a lot ! Could loose fasteners cause the problem? (Not engaging high range)
  9. General Kaiser

    Transfer Case problem

    Ok ! I will do it. Could be better if you have photos! Thanks
  10. General Kaiser

    Transfer Case problem

    Thanks , so thats not my problem. I hope I can fix it without taking out the whole unit 😂
  11. General Kaiser

    Transfer Case problem

    Syncronizer (I mean the gold part in your pics) should move with fork movement ? In my Deuce's transfer case when I moving the lever , synchronizer moves with fork
  12. General Kaiser

    Transfer Case problem

    Linkage is fine ! The skrew is tight and safety-wired! My problem is the fork goes back and contact transfer case body , but synchronizer wont move beck enough to engage high range gear. Is it possible for fork to jump out its place to back and cant move synchronizer back enough? Thanks
  13. General Kaiser

    Transfer Case problem

    Hello everyone I had rebuild my Deuce's transfer case in last rew months . No problems until yesterday I was taking it to shop for taking out stuck screws of windshield , I had noticed high range didn't engage. When I was trying to hold the lever by hand , the only thing that happened was...
  14. General Kaiser

    M35A2 Low gear issue

    I bought NSK and Nachi bearings.
  15. General Kaiser

    M35A2 Low gear issue

    Hi Not at alll with your help! Thanks a lot. But I couldn't found Made in USA bearings and bought Japanese ones. But good quality bearings
  16. General Kaiser

    M35A2 Low gear issue

    Hello everyone I changed all six ball-bearings and assembled and installed TC on the truck. I should connect hand brake and speedometer cables and air hose and then put some gear oil in it and take it for a test drive.
  17. General Kaiser

    M35A2 Low gear issue

    Hello everyone I check bearing numbers and find some little different numbers. I cant read big bearing's number so well.
  18. General Kaiser

    M35A2 Low gear issue

    Hi , Thanks HDN These trucks imported to Iran by Shah of Iran for military. Non of them are from Iraq. IFA W50 is the only truck that imported to Iran during Iran-Iraq war . But Iran only used M34 and gasser M35 in that war and M35a2s kept unused until sold at auctions. Only small amount of...
  19. General Kaiser

    M35A2 Low gear issue

    Hi , Thanks a lot gringeltaube I will change all of the ball bearings. But roller bearing are in good shape I think. There are some signs of heating on some rollers only without any scratches.
  20. General Kaiser

    M35A2 Low gear issue

    Hello everyone I take the transfer-case out of the truck. The main problem is ball bearings. I don't know the roller bearings need to be replaced or not. All bearing are Made in USA except one bigger roller bearing wich is Made in Japan. Some pics
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks