• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    Injector Return Line Fittings

    To finish the injector drip lines, I used 1/8 NPT brass T fittings with (2) female ends--along with male threads to screw directly into the injector. The DOT airline compression fittings I used are 1/8 NPT; they screw into both ends of the T fittings after it is installed in the top of the...
  2. J

    Injector Return Line Fittings

    Appreciate the replies! I saw the picture of the fittings earlier, which helped me understand how the hydraulic shop got confused. I'll try to get there tomorrow morning and get it sorted out. I have a crapload of fittings for DOT airline, so I will try to replace the T and 90 fittings so I...
  3. J

    Injection pump oil hose

    That would be awesome if you find it, and I will search also. It was the two way fitting that was smashed when I removed it, figuring I could replace it easily. The education continues!
  4. J

    Injector Return Line Fittings

    Yeah I saw your post with the part numbers (Parker Hannifin 3501E). Unfortunately the person at the hydraulic shop was new. She couldn't find the parts in the Parker Hannifin book that I needed. I think my ignorance about threads in general and her newness contributed to the end result...
  5. J

    Injector Return Line Fittings

    My local hydraulic shop can't seem to get the proper (T) fittings and 90 elbows to replace the injector drip line hardware. They told me the fittings were 7/16 x 24 and they don't carry any for DOT airline. I took some of them off to get the proper sizing and crushed them in the process--so...
  6. J

    Injection pump oil hose

    looks like I'm late to the party on this one. Can you guys tell me what the threads are so I can have some hoses made? Unless GimpyRobb still has sets available... RustyStud, do you recall what stainless steel fitting you used? I ruined my fitting removing it and I'm not sure if I still have...
  7. J

    MRAP adapter bolt size?

    It would be quite a trick to find it in the repair manuals considering it was never an application for a deuce and a half. I think everyone has given you all the information they can without having the specifics of your application. Not only do you know grade 5 is sufficient but the grade 8...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks