• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    Need help sourcing a fuel bleeder screw

    Ah, very good. Not sure how I missed that. Thanks.
  2. S

    Need help sourcing a fuel bleeder screw

    So I replaced all the fuel filters over the weekend. Bled the system and tightened the little bleed screw between secondary and final fuel filters too tight and it snapped off. I have looked at all the main surplus sites and cannot find this part. Can anyone point me in the right direction. Also...
  3. S

    Brakes running hot, unable to adjust to spec

    Well I got them adjusted to spec. I had to do the opposite of what the TM said. I had to adjust the top of the shoe first, then move to the bottom. Then I went back and forth until both were in spec.
  4. S

    Brakes running hot, unable to adjust to spec

    OK this could have something to do with it. When looking at the bottom adjuster it had a "dot" indicator on one side. This was at 3 o'clock initially. When I started I checked the gap at the bottom first. It was out of spec, the gap was too close. To get to spec I had to adjust the bottom...
  5. S

    Brakes running hot, unable to adjust to spec

    I am shooting the temp gun directly at the brake drum from under the truck near the inside of the wheel. The hub temps are fine.
  6. S

    Brakes running hot, unable to adjust to spec

    Hey all, I need some help with brake adjustments. One of my drums is running hot. A little while ago I singled out my truck. While flipping the hubs I went through and replaced all the axle seals and bearings. Since then I have been monitoring the hub temps with an infrared thermometer. Since it...
  7. S

    New guy from centeral NC

    I think he may be referring to titling as an antique vehicle. When doing that someone from the DMV will come out to inspect it. If registering normally, they will not. As far as the DMV, very easy for me. Just make sure all your paper work is in order. If not going the antique route, as far as...
  8. S

    New guy from centeral NC

    http://www.whiteowl.com/index.html http://www.jimhenrystrucksales.com/index.html
  9. S

    4th of July fun on the beach

    Oh yes, living at the beach I am very aware of how harsh the environment is. No worries there, it got a nice long bath with the pressure washer when we got home.
  10. S

    4th of July fun on the beach

    Hey guys, haven't posted here much yet. Mostly I've been lurking around reading. I've had my Deuce now for about 2 months. I've been doing some light restoration and catching up on a good bit of PM. We had some fun with the Deuce and took it out on the beach over the 4th. I was impressed with...
  11. S

    M35A2 recovery 5/17/14 Concord NC to Wilmington NC emergency contact JIC

    Happy to report we made the 200 mile trip home without incident. The truck ran great the whole way. The weather was PERFECT. Forgot to take some in route shots but snapped a few after we got home. All in all couldn't have asked for a better maiden voyage.
  12. S

    M35A2 recovery 5/17/14 Concord NC to Wilmington NC emergency contact JIC

    Hello all, new here. Have been lurking around for awhile trying to absorb as much info as possible. This Saturday (5/17) I will be going to pick up a new to me deuce. I will be making the trip back with it from Concord NC to Wilmington NC. I am purchasing from a SS member. I have already looked...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks