• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rogerpeterson

    MEP003A Regulator Problem

    Thanks for the info. I had got so involved fixing the Genset that I didn't finish everything. Will keep you posted on the outcome.
  2. rogerpeterson

    MEP003A Regulator Problem

    I just pulled a Rectifier out of the generator and could read 1N120 and could not read the last digit. So I ordered 3 1N1206A and 3 1N1206RA diodes. Thanks for the help guys Really appreciate it Rog
  3. rogerpeterson

    MEP003A Regulator Problem

    I just pulled a Rectifier out of the generator and could read 1N120 and could not read the last digit. So I ordered 3 1N1206A and 3 1N1206RA diodes. Thanks for the help guys Really appreciate it Rog
  4. rogerpeterson

    MEP003A Regulator Problem

    Looking for part numbers Looked at TM-5-6115-585-12 Looked at TM-5-6115-585-24P Looked at TM-5-6115-585-34 None of the above gave me the part numbers. Anyone know where else to look.
  5. rogerpeterson

    MEP003A Regulator Problem

    Just went out and checked the rotating rectifier diodes and they are all bad. Now to find the part #'s and get some coming. thanks
  6. rogerpeterson

    MEP003A Regulator Problem

    I am wrong about that, we never tried removing the 12 volts and reconnecting the other leads while running. Didn't want to make the situation worse than it already was. I had been using the generator to power a Lincoln Cracker Box welder and had done about 3 hr of welding with it, when one time...
  7. rogerpeterson

    MEP003A Regulator Problem

    If I remember correctly, it dropped back to 0
  8. rogerpeterson

    MEP003A Regulator Problem

    My MEP003A will work when I flash the field with -12VDC on TB3-5 and +12VDC pm TB3-6. I have two extra regulator boards and have tried both of them with no success. When I measure the voltage on the reg board terminal 12 and 18 during starting, both show +24 volts. It drops to 0 when I release...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks