Search results

Here is a picture of the passenger's side small bracket I was talking about. This was the only one with welds.

Here is an example of what I mean. You can see the overlap seam.

I have a question on this. I have seen the plates for sale but my government installed kit came with small corner braces for the top of the corners of the cab. Are you guys getting these and installing them with your kit or is is just the large plate. Also, my plate is actually one large plate...

Check my other thread on the subject for the information on welds. Basically the top two braces in the corner were welded along the perimeter. The military puts in the pop rivets and there are approx 70 of them. The welds should work put I would think that pop rivets would be quicker.

9/16 is way too big. I would guess around 1/4 inch but it is hard to measure them when the shank is in the backside or the plate. The flat head may be 9/16 but the actual shank diameter is the one that they are sized by. It looks 1/4 inch would be real close and mine seem to be steel rivets. If...

Other than saying they are pop rivets I can't help.