• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    MEP 802A Pops CB2 when I turn S1 to prime

    My 802A was working fine until the battery cable went lose and sparked on the post. Generator shutdown and now the Emergency CB2 pops when I turn S1 from OFF to Prime/Auxillary Fuel. CB2 does not pop in the PRE-HEAT position. I was thinking maybe the Alternator fuse may have burned but that...
  2. S

    MEP 002 Produces no output

    Thanks you again everyone for your suggestions. The airpax is functional. I believe it is CB3. I will test the terminals with gator clips and a test meter. Guyfang L0-L3 is producing 110 VAC. Any suggestions on where can I find a replacement if CB3 is bad? This Gen is so much fun I think I...
  3. S

    MEP 002 Produces no output

    Thanks for the reply Guyfang. I flashed several times. I finally got L1-L3 to read ~220 VAC, L1-L0 was ~110 VAC. Plugs are still dead. Is the problem now the cheap pull breaker or the socket plug?
  4. S

    MEP 002 Produces no output

    I have acquired a MEP 002 which runs. Voltage dials up 220 VAC, 1800 rpm produces 60 HZ and the battery meter shows that it is charging. I turned the main run switch to start and held it for 3 seconds to flash energize the field. Everything works and is warmed up so I throw the main breaker but...
109,456members
164,390threads
2,313,625posts
394online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks