• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. I

    Mep 806A

    Thanx to you and everyone on this site, your expertise is a very valuable tool and appreciate it very much.
  2. I

    Mep 806A

    Everything worked perfectly after installing
  3. I

    TRC Regulator Kit

    Thanx guyfang, all parts installed and genset is up and running, appreciate everyone's help, you guys are great.
  4. I

    TRC Regulator Kit

    I received my TRC voltage regulator kit to install on my Mep 806A, might be a stupid question but where does the resistor play into this kit, does it attatch to the regulator, am I missing something?
  5. I

    Mep 806A

    OK, I got the kit in (TRC), exactly where does the resistor go?, on the regulator
  6. I

    Mep 806A

    OK, I got the kit in (TRC), exactly where does the resistor go?, on the regulator
  7. I

    Mep 806A

    Will keep you updated, thier making me go through regular federal buying, so I will probably be retired before I get the parts.
  8. I

    Mep 806A

    Thanx for the help Guyfang
  9. I

    Mep 806A

    How do I go about purchasing them, I'm still in the military as a federal tech, do you have a website or something
  10. I

    Mep 806A

    Do you prefer the TRC over the LIBBY
  11. I

    Mep 806A

    So this is the kit I need:Kit Volt Regulator 6110-01-477-4851
  12. I

    Mep 806A

    Well I checked the transformer and its a TRC transformer, so I have a Libby regulator and pod and a TRC transformer, , and the way you have been talking they are not interchangeable is that right
  13. I

    Mep 806A

    I have checked the pot and the regulator and they are the right ones, like I said, I havent been able to look at the transformer yet but it looks very suspect, I mean it looks like they picked it up at a **** radio shack.As of right now I see NO part numbers and it looks very generic.
  14. I

    Mep 806A

    The regulator and the pot are the same, its the transformer that has me baffeled
  15. I

    Mep 806A

    Here is a pic of the regulator, I know that they just purchased the regulator, and not as a kit, the power transformer they also put in looks suspect and is just spliced in
  16. I

    Mep 806A

    I am not at work at the moment, they tell me they put in a new regulator, and it looks new, part # is good, I will put up a pick when I go in tomorrow,I do know they say they replaced the regulator and the power transformer, and with that they just threw it in and spliced it in.
  17. I

    Mep 806A

    Yes, Undervoltage
  18. I

    Mep 806A

    Well I just checked the over voltage and under voltage relay check per TM and when I disconnect wire 137 from terminal 5 on the regulator I am not getting a OVERVOLTAGE lamp and it says I should, and after that when I do the second test I am not getting an under voltage light and the AC circuit...
  19. I

    Mep 806A

    As long as I hold the start switch I have 60 hz, and I do have voltage 180 but no control of raising it with the pod, I did what you said and as soon as I throw the battle short the under voltage lights and I lose hz and voltage, I'm in Indiana
  20. I

    Mep 806A

    I have an under voltage light, the individual that brought it to me had just put a new voltage regulator in it, I did some tests and it checked out, I am starting to wonder if its the undervoltage/over voltage relay
109,468members
164,398threads
2,313,731posts
560online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks