• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    MEP-805b starting problems

    Thank you Guyfang and 150mm for the help. We changed the 3 amp fuse and put in a 10 amp as recommended. We grounded the jenny and tested. the jenny fired right up and did everything it is supposed to do. We had to bump the start switch to excite generator and all the values seem to be at 208...
  2. S

    MEP-805b starting problems

    Thanks for your reply. The gen set is full of fuel and the gauge verify it. The batteries are in sequence for 24 volt application. I have no manual but have recently downloaded one. We haven't performed any other test because I ran out of 3 amp fuses yesterday. This may sound stupid but I you...
  3. S

    MEP-805b starting problems

    My MEP -805B will start and run for only 2 seconds then shuts down with a blown fuse behind the control panel, it's a 3 amp round fuse. Any ideas, need help. Thanks Skeeter
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks