• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    Mep-803a interlock setup

    Two sets? One set comes with four already.
  2. J

    Mep-803a interlock setup

    I’m currently looking to figure out how to fabricate my own fitting in the 3/4 inch bung using metal instead of pvc. Once I overcome that obstacle of getting a pipe to connect to the bottom side of a bushing I’m going to get a 2 inch vented filler cap from tractor supply.
  3. J

    Mep-803a interlock setup

    Yes I looked for 3x3x1 inch anti vibration pads off of Amazon and it made a world of a difference with vibration on the ground. Before the anti vibration pads when I mounted the generator on the concrete pad it amplifies the vibration through the ground so badly that I could feel the ground...
  4. J

    Mep-803a interlock setup

    Just wanted to show my 2006 mep-803 set up with a 60 amp interlock kit. Have a sub panel box as well for load testing. Also purchased a 55 gallon drum for a auxiliary fuel tank
  5. J

    Mep-803a oil pressure drop

    Every time the generator starts it always starts with the pressure being around 50 and after running for a while is when I notice the oil pressure dropping to the low 20’s. I also flushed the rediator because the radiator cap was missing the second rubber gasket So the coolant wouldn’t go into...
  6. J

    Mep-803a oil pressure drop

    thank you I will look into finding a oil pressure gauge. should I not trust go off of the main gauge on the control panel?
  7. J

    Mep-803a oil pressure drop

    thank you I will look into finding a oil pressure gauge. should I not trust go off of the main gauge on the control panel?
  8. J

    Mep-803a oil pressure drop

    Just purchased a 2006 Mep-803a with 2500 hours on the unit. I changed the oil right when I picked up the getset and changed the filter as well with rottela t5 synthetic blend 15w-40 and a wix filter 51374. When the unit is cold I get a great 50 psi and as soon as the unit warms up to temp it...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks