Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
With peters help I will be testing the startup.
It maybe best for me to test A5 R3 first. From what I understand it overheated because of the transformer.
I have reinstalled A11 without the cover for visual checking.
The reconnection board is verified to be wired correctly.
The startup sequence...
This is the new transformer connected to A11.
Below is the wiring up directions.
1. make a jumper wire
16ga from H2 to H3
2. make a Jumper wire
16ga from X2 to X3
3. connect X12KK
and X12JJ to H4
4.
connect X9Z and X9W to H1
5. connect D12E and
D12D to X2/X3
6. connect P4A to
X1
7...
Just got the new transformer in and it got a lot smaller foot print.
No big deal for me because of only drilling new holes.
The one atop the toasted will be the replacement
Kris
OK
I will remove F1 and F2 and ohm between them
Then report back.
I will see if I can order the transformer you suggested today and will need instructions on how to wire it up.
Kris
Like I say I'm a mechanical Engineer, but when I went to college I wanted to be an electrical engineer and did not pursue it.
Mechanical was more natural for me.
Kris
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!