Search results

Well, I'm back. I desoldered 1 leg from the diodes and the questionable resistor and tested them. They all tested good. The plastic coating on the boards just makes the components look dark and the board look blistered in places. I swapped out both of the mosfets for new ones because one of...

Thank you for the reply daybreak. Do you have any input as far as the location for the mov on an 804? I'm assuming the 2 pins that feed the h bridge (10/11) are the ones that it should be on if it's purpose is to protect that part of the circuit. I really did try to find this information via...

Thanks for the heads-up Guy. I have the TM https://www.steelsoldiers.com/attachments/tm-9-6115-464-34-pdf.609454/ it does not specify libby or technology research corp anywhere in the manual but the schematic on page 338 (3-274) appears to be correct. I'll sift through the rest of the TMs...

Thank you very much for taking the time to respond. I've just finished reading that reset manual. I will be doing the fuse mod described in section 5.3. I did not see any information related to installing the MOV for any models in the reset manual. Do you have any information related to...

First post and it is a big one. Thank you in advance for taking the time to read it. My dad recently got an 804a generator with 2 hours on it. It still has the break in oil in the engine. The injectors weren't getting any fuel and he gave it an attitude adjustment with a slide hammer until...