Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Started the truck the other day and all was fine. I haven't started it in a number of years. The shut off rod was so gummed up, it was hard to move it with a screw driver. I removed it and cleaned it up to move freely and reassembled. Put batteries in and it started up fairly quickly and ran...
I had a sticky fuel shut off rod so I removed it and cleaned it (yes I used the sticky, Thanks). The question I have is when replacing the shut off rod- Can the shut off rod be in the wrong position if the rod sits flush with the housing? while trying to replace the rod I felt like it was in...
I found my problem. I removed the instrument cluster to clean the printed circuit and when reinstalling the #4 and #5 contacts were touching, causing the fuse to blow. All dash lights now working.
I have a new to me 1028. I have been trying to get all the issues repaired. The oil pressure light does not come on at start up. With the truck running I shift the transfer case into 4 wheel drive and the Gen 1 light gets bright and blows a fuse (accessories 20 amp). I have cleaned up the...
What I found on 20-P. There are 2 different ones listed. #30 is part # 2232073 and part #34 is 2232072. When I used those part #'s to try to find the part I couldn't find that part for sale. I hope this may help you.
Look at this thread it may help you.
http://www.steelsoldiers.com/showthread.php?117619-Cucv-starter-bracket/page2&highlight=starter+bracket
Sorry that was the direct drive bracket.