• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Seq

    Got my MK30 Today

    Nice truck! Going to need some serious sideboards!! Sent from my SM-G955U1 using Tapatalk
  2. Seq

    PTO neutral on M51A2

    Hmmm. It rubs on the idler arm. Do I just have to live with it?
  3. Seq

    PTO neutral on M51A2

    So, can you ID this wheel? It's what's on the truck now. Sent from my SM-G955U1 using Tapatalk
  4. Seq

    New Member from Port Angeles, WA

    Welcome from Sequim! Sent from my SM-G955U1 using Tapatalk
  5. Seq

    PTO neutral on M51A2

    New hydrualic pump installed and PTO all sealed up. Still weeping a bit of oil from the auxiliary shaft after driving a bit but I can live with it. I have to engage the auxiliary shaft by hand as I'm missing the linkage. I think I'll just make it air actuated if I can find a cylinder that will...
  6. Seq

    PTO neutral on M51A2

    That sound like a better plan. Bearing is good. Sent from my SM-G955U1 using Tapatalk
  7. Seq

    PTO neutral on M51A2

    How is that retainer coming out (#39)?!?!! Can I push the shaft out far enough to remove the seal so I can get at it from the back side? There is not much room to work in there! Sent from my SM-G955U1 using Tapatalk
  8. Seq

    PTO neutral on M51A2

    Thanks, I'll have to take a look tonight. It does seem like that collar moves too far forward. Any idea if the boots on the shift rods would be available at a local parts store or are they a specialty item? I figure I can get everything else locally (seals & gaskets) and am hoping to have this...
  9. Seq

    PTO neutral on M51A2

    Got it all apart tonight and figured out my problem. Just wasn't pulling the shift rod back far enough. Pulled to 1st click and figured that was it. I'm assuming the aux shaft needs to be pressed out. Sent from my SM-G955U1 using Tapatalk
  10. Seq

    Convert M817 PTO to air actuated?

    Did you ever get this done? Looking to do the same with mine and would love some pics!
  11. Seq

    PTO neutral on M51A2

    How difficult is it to replace the shaft and shift rod seals in the PTO? Figure I might as well get that done while I have it off.
  12. Seq

    PTO neutral on M51A2

    And here she sits until I get a new hydraulic pump and figure out my PTO problem. Sent from my SM-G955U1 using Tapatalk
  13. Seq

    PTO neutral on M51A2

    Hauled 5 yards of drain rock last week. Wasn't bad except for 1 big hill. Need another gear between 3rd and 4th. It's got the LDS, not the mack. Sent from my SM-G955U1 using Tapatalk
  14. Seq

    PTO neutral on M51A2

    Tops out just under 60
  15. Seq

    PTO neutral on M51A2

    I'll take if off and take a look.
  16. Seq

    PTO neutral on M51A2

    It still spins when hooked up to the hydraulic pump. What do you mean by one click from the top? There are 2 shafts that move in and out of the PTO housing. One on top and one on the bottom. The one on top only move maybe a 1/2" in and out with a definite click. The bottom one slides 4-5...
  17. Seq

    PTO neutral on M51A2

    I can't find neutral on the PTO on my M51A2. I've removed all the linkage and can move the upper and lower shafts (not the output shafts) in and out but nothing keeps the rear output shaft to the hydraulic pump from turning. I can get the front shaft (for non-existent winch) to stop. I took the...
  18. Seq

    HMMWV Bill in Washington State...Testimony help needed

    Being a life long Washington resident I'd be surprised if they authorized these "assault vehicles" on the road. They are camo you know! Scary!!
  19. Seq

    Portland to Sequim (Hopefully)

    Clearing my property first. Then restore and take to local shows. Sent from my SM-G955U1 using Tapatalk
  20. Seq

    Portland to Sequim (Hopefully)

    Title says 68. Don't know how to verify that though. Weird thing is he gave me the original hood and fenders which look like they come from an 817. Sent from my SM-G955U1 using Tapatalk
Top