• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    Calling all Generator Owners

    I'll throw my 2 cents in. On my MEP-003 I did what one of the earlier posts mentioned and changed the air, fuel and oil filters. Because of the crud in the fuel tank of the my first MEP-003 and the rust in the second MEP-003 I disconnect the fuel line that goes from the tank to the pumps and...
  2. K

    MEP-003 Govenor linkage & fuel shut-off?

    Thanks, I appreciate the information. Here is what has happened since I made the post. Because I haven't gotten the fuel tank clean yet I am using a 5 gal fuel container. I bought the two generators in 2009 and because of health problems I haven't fooled with them. Anyway, I put a good dose...
  3. K

    MEP-003 Govenor linkage & fuel shut-off?

    I have one of my MEP-003 generators running but it was hard to start. Once it is running it runs great. I found if I open the cover that's over the glow plugs and fuel shut-off soleniod then move the governor linkage up a little it starts much easier. In TM5-6115-585-34 In paragraph 7.3 f...
  4. K

    MEP-002A Fuel Cap ?

    Fuel tank cleaning Glad to learn that pressure washing works. I was thinking about doing that but I was going to put a 90° elbow on the end of the wand to get the sides better. I am not a diesel person but the fellow I work with is and he suggested putting a biocide in with the fuel. That...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks