• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Billy Bobbed

    Is this bearing OK to use?

    I found some brg failure pictures. We have one at the shop that shows more in detail than this but close.The brgs. you have my last for a long time if you put it back together but I would roll a new set in sense you got it torn down its your truck. AOL Search
  2. Billy Bobbed

    Is this bearing OK to use?

    I regrind crankshafts and sell brgs for 27 years, if that brg is starting to pit you need to replace it and check the rest.It might save you in the long run.a pitted brg is not good.
  3. Billy Bobbed

    Is this bearing OK to use?

    You dont have to take the crank out to change brgs,you just roll a new brg in the block.Just push it out with something that wont scratch the crank.
  4. Billy Bobbed

    Is this bearing OK to use?

    If your not in the brass,not burnt or peeling it should be fine.And if it has a good wear pattern.How does the main on the crank look. Edit The side were your thumb is,is that pitting or something else.
109,613members
164,501threads
2,314,806posts
611online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks