Search results

Artisan's M916 ENGINE FAILURE Where do I start? I will be semi brief. Left N Idaho w/ the M916 a coupe days ago bobtail. Truck was running AWESOME, smooth, no vibrations, tracks straight down the road, life is good. I want to get home and fly to Columbia and help a friend plumb his home...

Well it's an A1 w/ 1400R20's so looks lke were pushing the envelope. Understand the front tires will go past the front edge of the trailer a smidge, there is a 4" x 4" piec of angle iron that is adjustable at the front sooooo... THANK U Simp!

Hmmm, so if I have a 20' long tilt trailer deck it will be cutting it close I assume w/o some semi - serious math work. THANK U Gringel... (Capacity is 27200 pounds.)

My 5 Ton is in Idaho, I am in L A. The book says an M925A1 has a wheelbase of 179" . I am correct that dim is from center of front axle to center of Rearmost axle yes? So if tires are 49" in diameter the dimension from the front of the front tire to the rear of the rear tire would be 19'...

Cat 7155 Ratio Selector Mod AWSOME ! This mod lets a guy shift up 2 gears at a time all the way to 16th gear! If you are running bobtail or light this is sweet! CLICK HERE Many Thanx to SS member Ponway I believe it is that figured this mod out! Read more about 7155 stuff HERE .

Guys is there anyone close to me in Los Angeles w/ ANY air brake truck that can move an unladened air brake trailer that probably weighs 5ton or so from Ontario, CA (Holt Ave) to Monrovia? I am a buyer. I think it is about 26 miles. Both my trucks are up by Spokane at the moment. Edit; DONE...

I suggest you contact Dave at Easternsurplus. If those rims are incorrect he will have what you need and maybe better tires. They can mount and ship easy peasie. Tell him I sent you.

Looks like zero tow I shall try...

SO I got 4500 miles on the new steer axle tires before they showed serious wear on the outside edges, both PS and DS. I am considering move the left tire to the right side and the right to the left, maintaining directional rotation to get another 4500 mile of use. Does anyone have a better...

Does the TM show a spacer? I do not remember seeing one... Do good research...measure twice, install once.

Hey guys I am away from home w/ limited resources. I have a need to move my Schutt WITHOUT it connected to the truck. In a nutshell I left it parked on a dirt road over the winter and crazy rains caused the trailer to sink. I got the M916 out by airing down and laying out some plywood. The...

It is sincerely a crying shame that the owners of this forum, after multitudes of special requests from it's members, that said owners have not yet created a forum for the 20Ton Trucks. I do NOT care about the helicopters and black ops and senators and other CRAP that THEY brought down upon...

Should sell very fast at that.

What are you a$king for it?

There is an oil pressure safety switch. The oil pressure HAS to come up before the engine will start. Read this whole thread about injector pumps needing to be massaged as well. The first batch were flooded at one time were found out. If yours was in that batch you will have many of the same...

I have never measured the angle but it really gets up there. In post #2 in this thread you can see an almost fully extended hoist. I bet ya it is more like 40* These trailers are AWSOME, the potential is huge on all fronts.

Is that your trailer 98?

Paul, The mission I bought the trailer for is now complete. It will have other missions in the future. It performed well. I did have a radiator failure as I believe I penned about herein, and I suffered a broken weld on one of the triangular shaped chain to container attachment device. The...

hey MIKE! Looking good!

Look at BOTH BULBS too if not LED. I had an issue, DAM, BOTH BULBS were bad!