Search results

Thanks Green- taking it apart and putting back together was no prob. I must have turned the axle some when I put it back together enough for the spider gears and springs inside the posi to walk off. I ended up marking the bearing caps and taking the assembly out and bringing it to my...

Well, in turns out that I have an eaton Posi and not the gov-lock. I am towing the truck to a shop that I've worked with on my jeep to have them fix this thing, the spider gears walked of so much that it's binding at the pinion gear...it's going to have to come out and be reinstalled. If...

my86- Thank you. Did yours spin easily? and when you turned one wheel where both off the ground or just one? Here's why I'm asking, I tried to rotate on wheel but the other wheel but it spins as if it's locked up. I also had a buddy hold the other tire while I turn one wheel back and forth...

Thanks Denny- That makes sense, I'll see if I can get a hold of a large drift pin. The issue i have too is that the Gear is covering most of the Hole, I should be able to get it to line up more by putting it in gear in reverse or forward to apply torque to the housing, that makes it move. Any...

Hello SS Members, First Post from a new member her. Thanks for all the great info on the site, loving my M1009 recently acquired. I've been going through some maintenance Items and one such item was a rear axle seal. I changed those out no problem but somehow my gov lock rotated enough...