Search results

hello Kurt , yep it was a ride , my other generator with your wifi is working perfect . still nice and warm here hehe Alex

Gentlemen , Hold on to your hats . Yesterday i talked to the previous owner of the generator , i bought from him with a bunch of other stuff like fork lifts , backhoe loaders i ask him if there was a time the generator was working fine and yes it always worked fine until the same problem we...

Hello , thank you for the picks now i,m confident in taking the pump apart , and find out what is going on inside haha Alex

Hello Guy , the ac jumps between 160 / 180 volts , is there a diagram how to pump suppose to be on the inside , so when i take it apart i can check if it is correct , maybe the person before me did not installed the richt way when i just lossen the bracket that holds the pump it starts...

Hello Guy and Ray , it runs on all 4 cil but not the rpm it need to run nice ,took the metering pump out ,and let it soak in break clean for a day or so or can i take it apart it looks like it has some marks on it from tools and i can move the rack there are 3 shims sins nobody fooled around...

Hello Guyfang and Ray , i did remove the muffler no change stil smoking , when i loosen the metering pump it wil pick up and runs on al 4 cil i let it run for an hour or so even with a 50 % load it is still smoking more then normal output is good 220 v and 110 v 60 Hz when i shut it down it...

Hello Ray , i did not use the cans of starting fluid for starting i did a bit of cleaning work on the injectors , when i had them out ,no brake clean or carb clean on site . and i was in the marine corps for 8 years so send Guy over whahaha . the reason the machine is or was idling so low is...

Hello Ray, so fare i found out that it is the cilinder closes to the radiator , even after changing the top injectors it still was not running on al 4 cil all metering pumps are in the same position , when i crack open the line coming from the pump diesel is sputtering out so it getting diesel...

Hello Ray , thanks for the quick response , So i switched the injectors on the cilinder Head no change when i crack the line direct from the metering pump there is a small change little more rpm but not enough to pul it to run on all 4 cil ,i think the metering pump is not working correctly...

Hello ,i have a mep 803a with about 1000 hours on it , it starts up rough i have to adjust the fuel injector and then it picks up and runs great black smoke i had it under load and still runs good still black smoke but not as much ,when schutting down it taks a while it sputters and rumbles...