• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    Starter change out with new style wiring??

    SS- So I pulled the TM , and have the wiring info. Now, how do I swap the gear tooth? My original is 12 teeth, while new starter is 11 teeth and a much larger gear. to add on ,understand you can swap the head and such, but the shaft on the new starter is larger also.
  2. D

    Starter change out with new style wiring??

    SS - Howdy, I am still working my starter problem and now swapping it out for a new one. I have the old style in the truck and purchased a new style, one with bell shape solenoid on top. my question is where do the two small wires go on the new style? I’m not seeing the same Type of connection...
  3. D

    Help with starter and solenoid

    SS- I ran into a problem with the starter solenoid and now maybe starter… For a little bit on button start truck would click and not fire up, on and off, no real big deal. Then while driving I heard a humming noise and then a pop and all electronics went out. So I checked batteries and one...
  4. D

    Brake help support after new master cylinder

    I think all the air is out. I can double check. I will say the brake pedal is pretty firm currently.
  5. D

    Brake help support after new master cylinder

    Ok, so pressure bled the system. Have good pedal pressure,but… As stated above, when I press and let up pedal it’s bubbling air through master cylinder fill top fitting. I have a remote rescoir now so it just bubbles air up to that. pedal is firm and I do have good brakes, but is there...
  6. D

    Brake help support after new master cylinder

    ok, pressure bleeder it is then.
  7. D

    Brake help support after new master cylinder

    Had son helping me. Good ole, pump the brakes then hold, and bleed. never had a problem on other vehicles doing brake jobs. But since this also has an air pack thought maybe I’m missing something in the procedure of this beast.
  8. D

    Brake help support after new master cylinder

    Well a new twist. re-bled the system. Started at air pack, lots of air. Got that out went to rear paswenger lots of air, got that out. hit the rest. No air and fluid coming out. No pressure at all. went to rear passenger, lots of clean fluid coming out steady, no air. went to air pack...
  9. D

    Brake help support after new master cylinder

    SS - Been experience some ongoing brake challenges. When first got the truck brakes worked good. I added a remote brake reservoir so I could monitor the fluid. Well when apply brakes I noticed the fluid in reservoir would bubble and want to blow out. As I drive more it started to get worse...
  10. D

    Remote Brake Reservoir- Bubbles when brake applied

    Thinking to amount of fluid I put in, it may have been quite low… Prob need to bleed, is it pass rear furthest away to do the bleed??
  11. D

    Remote Brake Reservoir- Bubbles when brake applied

    SS - Hi, just installed BM remote brake reservoir. When applying brake lots of bubbles come up to it and push a lot of fluid out. Any thoughts? Bleed all brakes now?
  12. D

    Towing 30k lbs?

    Ok, so Deuce is setup for 10k lbs, hmmm seems low for a military vehicle, but understand it’s older and had a purpose probably for troop hauling and resupply of light duty things. I will keep it as is, for light duty and fun
  13. D

    Towing 30k lbs?

    Ok, thanks. I have seen my same Excavator pulled by single axle small dump trucks. Figured it may be close in a weight comparison balance. Again only on pretty flat ground around town at low speeds 45mph or lower. Just seeing if I could use the deuce for some work here and there, not daily.
  14. D

    Towing 30k lbs?

    Was looking if anyone is towing around their equipment with Deuces? I have a 28k lbs excavator and just checking on mostly flat ground around town if the deuce LDT engine can handle this or not?
  15. D

    cost of ownership (the real cost of a deuce)

    Just purchased the deuce. Drive it daily, clean truck, was just gone through completely about 5 years ago. Only issues is two wheel cylinders now leaking, only drive on my land right now. Also want to add air assist steering and new fiberglass top. Have prior taken it around town and small trips...
  16. D

    Single Circuit Brake - Safety Valves?

    SS - In another posting i was pondering a theory that seems very probabaly. Hot roders and custom car builders use proportional valves for their brake systems to add a safety factor. so has anyone checked into simple adding an inline proportional value on each side of the tee 30? Or even put...
  17. D

    modern dual circuit air over hydraulic brakes

    In theory an in-line single proportional or safety valve on each side of the tee 30 to isolate front and rear brakes, I would suspect could add a good safety benefit if pressure is lost, would allow at least to stop as it should close the valve under a pressure drop scenario. but, we have kind...
  18. D

    modern dual circuit air over hydraulic brakes

    Great diagram. Hmmmm, not a hydraulic or brake expert. But at that 30 tee, could there not be a splitter valve or some sort of that would close either side in an event of a brake cylinder fail? That seems the cheapest and easiest route. If there is such a thing out there it would allow then...
  19. D

    modern dual circuit air over hydraulic brakes

    ok. Intresting with dual tanks and such, a splitter or something would not accommodate since you already have an airpack onboard.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks