• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. JRBAMATEX

    Compressor Pulley

    RE: Re: RE: Compressor Pulley Thank devilman96. Your suggestion was right on. It worked like a charm. Thanks to everyone else as well. All great sugestions. Hopefully I wont need to do this again for some time.
  2. JRBAMATEX

    Compressor Pulley

    OK good advice from all. I am normally a big believer in the right tool for the job but I am a little pressed for time on this deal. Gonna give the pipe wrench a try first and then after I screw up the pulley I'll call memphis for a new pulley and order the wrench from RDM. Wish me luck
  3. JRBAMATEX

    Compressor Pulley

    What if you took the bolts on the front pulley all the way out and then took a piece of flat stock 1/4 X 1.5 inch steel and bolted it to the other side of the pulley in the hole where the bolts had been only bolted to the side where the threads are. Thus making a handle. You would use a bolt...
  4. JRBAMATEX

    Compressor Pulley

    I am working on changing all the belts and hoses on the Deuce and replacing all the hose clamps with T-Bolt hose clamps. In the process of doing all this I have been trying to figure out the best way to deal with the compressor belt and the pulley. I was working through a post with some of the...
109,835members
164,605threads
2,316,503posts
630online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks