Search results

I cant get the mounting plate nut off. It was torqued to 110 ft lbs. I have soaked it in penetrating oil, hit it with the torch, and pounded on it with the chisel. You mentioned using a punch? Where should I hit it with a punch? I dont think my chisel is effective. I must not be hitting...

Thanks for the offer. I could buy a ticket, considering the cost of the brand new, assembled hydraboosts I saw at $500. This piston or plunger thing is what connects between the hydraboost and the master cylinder. I have been looking at it, and I have concluded that plastic oiece on the end of...

I got everything apart and off the truck. Thats where the trouble starts. These rebuilt hydraboosts ask you to take out the star shaped retainer that is holding in the spring tensioned plunger. You are supposed to transfer this to the new unit. Taking it out wasnt to hard. After I got it...

which mity vac do you use?

I am finding it very difficult to access the two nuts on the firewall, behind the steering wheel/column. I tried dropping the steering column, but that doesn't really help. Do I need to pull out the dash to get in there?

Thanks. I should have it covered then. Plan to do it on Sunday.

Between the plate and the firewall. I was concerned that that is where it is leaking. Do you reuse the old one? I am worried that I am going to get into this and not be able to get that funny nut off to switch the plate.

I got a hydraboost 527307 from NAPA. No backing plate came with it. I have to take apart the old one. It also doersnt appear to have the rubber gasket.

Thats good advice. Thanks.

Thanks. Should I replace the master cylinder too ? There is a rubber seal, gasket 14004810. Does that come with the new hydraboost? I suspect that is where it is leaking. It isnt leaking into the cab.

new puddle I found a new puddle next to the driver side tire. Under the hood the wiring harness that passes by the steering column has a greasy substance on it, and the area has a lot of dirt stuck to it. I am guessing the leak has something to do with my brakes. 1) how are the brakes...