• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Pzkw88

    Alternator part

    Thanks for the great replies. I appreciate that, because I like learning more about the charging system.
  2. Pzkw88

    Alternator part

    Yes it's inside the alternator and that is the part. I bought an alternator off eBay that was said to be an isolated ground. When I hooked it up the battery sparked horribly and almost fried a battery wire. I took it back off and opened it up and noticed this part missing?!!! I have since...
  3. Pzkw88

    Alternator part

    I'm wondering what this part is and what does it do?
  4. Pzkw88

    Gen 2 troubles

    I cleaned the grounds as far as the alternator, batteries, etc. I'm suspecting that Gen 2 alternator is worn and is on the way out. It looks original to the truck. Thanks for the replies.
  5. Pzkw88

    Gen 2 troubles

    Hi. I'm sure this has come up before but I've searched and between here and my TMs I haven't found an answer. My Gen 2 light stays on at idle and goes out at speed. My batteries are new, belts are new, I've cleaned the grounds including the Gen 2 bulb socket, which actually made it worse...
  6. Pzkw88

    M1009 body modification

    There are four screws under the crank handle in a square pattern.
  7. Pzkw88

    M1009 body modification

    Yes it is. Lol.
  8. Pzkw88

    M1009 body modification

    I don't have a pic of it yet, but my 1985 M1009 has a modification that was done by the Army. There are two notches that were done to the rear of the pass side quarter panel. One is at the top while the other is at the bottom. Looks professional but I was wondering why the Army did this? It...
  9. Pzkw88

    Gen 2 alternator replacement question

    Ok I'll work on the pictures. I tried bypassing the component that's inline on the exciter and when I do that the gen 1 light glows with the key off and the low coolant light is on too. I'm not sure what some genius did or why but it's causing a headache. Here's what I do know, when the key is...
  10. Pzkw88

    Gen 2 alternator replacement question

    Thanks ill do that. I just found I don't have power at my gen 2 light socket. Checked the exciter wire and it has some funky diode or resistor inline that I don't know how to tell if it's good. Guess ill keep searching. Thanks again.
  11. Pzkw88

    Gen 2 alternator replacement question

    Hi, I'm installing a new alternator in the gen 2 position and I noticed that my truck does not have the black wire with push plug for the small stud. What was this wire for and where does it go? Any help would be appreciated. It's a 1985 M1009 army that transferred to the navy in the 90s.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks