Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I ordered my new pump from Mac Motors and it was a much better quality than the one Melton used. Old pump had a lot of travel before it was solid. I was reading on HPG and it said the spring shouldn’t show on the right pump. I did notice that spring showed on old pump but not on new. I don’t...
I used gasket maker to hold gasket to plate and gasket on the pump. I didn’t want it on the block and I figured I would be trashing the pump if I changed it again. I would only have to clean it off of one side of plate that comes off. Not a lot of room in there and I could only get one hand
I covered the end of rod with grease to hold it in while I took forever to get the plate and pump on. I had about 1/2” of rod sticking out of block and that was in far enough for me to get pump on. I also started the metal fuel line to help hold pump up
You need to take that plate off to get the rod back in. I just did mine and rod slide out and against the plate and that tells me the angle is wrong to get it in with plate on. Gasket needs replaced also.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!