Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Depends on what cable. There can be several different ones. I have had a lot of trucks that has radios removed before drmo but none with working radios. With the radio relay engaged in theory the main radio power cable should have power I don't see how the intercom would affect it. I would...
On the trucks I have seen, yes. Do you have the full height rack behind the passenger seat. That would be the digitizer and the install for that has the breaker that goes under the relay panel. It's a stupid spot for it you can't reset it unless you pull up the relay panel. It's safe to lift the...
There is non fused, unprotected power at the panel at all times with batts connected. You can pull it up live I do it all the time. There are Phillips head screws along the top and bottom of the metal frame it sits in which comes up with it. 12 and 24 volt comes up and connects under the...
The ones I saw had a manual reset breaker on the floor underneath the relay panel. You would not see it by pulling the kick panel off you have to pull up the relay panel.
Drop the passenger kick panel the wire comes up thru there. Does the relay engage when the truck is on? I think there is a separate breaker for it also. I have seen a larger breaker under the power relay panel.
Usually if no radio installed the relay won't be there. If the radio was installed at some point and then disconnected there may be a power lead floating around somewhere under the floor mat. Best to leave the relay out either way unless you are wiring something to the circuit.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!