• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rosco

    Boom Roller adjustment on m816.

    That shaft is "off-center" in the four bolt flange, that you removed the bolts from. You can see that in the picture. Rotate the four bolt flange, till the 3 oclock bolt hole, is at about 12 oclock. If you need a wrench to turn it, make one from something like 1/2" x 2", then drill two holes...
  2. rosco

    Boom Roller adjustment on m816.

    That shaft is "off-center" in the four bolt flange, that you removed the bolts from. You can see that in the picture. Rotate the four bolt flange, till the 3 oclock bolt hole, is at about 12 oclock. If you need a wrench to turn it, make one from something like 1/2" x 2", then drill two holes...
  3. rosco

    Boom Roller adjustment on m816.

    Hi Sam I'm not versed in your Wrecker, but more in other equipment. I'd look for another problem. Can you drop that whole roller assembly? Check it to make sure its all right and sizes haven't changed? Is there curd/debris inside the main tube, preventing the extension from raising? Is the...
109,866members
164,642threads
2,316,850posts
480online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks