Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
trailer jacks would most likly work, might not be enough volume for tools or a decent winch, a small humvee winch might work, i think thay work off the ps pump
not enough volume with the ps pump for a large dump. back to side sway, even frame dumps get a lot of sway when stood all the way up and go over quick, get out of level or have something hang up at the top, next to the dog house, i bet you suck seat cushion
you need to keep the 5th wheel from pivoting front to back also , the dump trailer has a pivoting king pin plate, if the 5th wheel is not stopped from pivoting ti will pivot when dumping , putting a lot of strain on the king pin and latching jaws, the dump trailer is designed to lift from a flat...
a wet kit would be easy, use the 817 (dump) trans pto. you dont went a xcase pto in this case because you may need to pull forward finish the dump, eather marry a pump to the pto or shaft drive, one hyd line ((at least 1" id) goes to a quick connect on the trailer, you only need to raise, it...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!