Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks to R Racing, think I will just try and flush the hydraulic system and try it again, making sure the PTO is fully engaged .
As far as flushing the system, my plans are to disconnect all hoses that I can and drain as much of the milky stuff out. I ten plan to put in about 10 gals (or...
Winch Hydraulic oil looks like heavy cream
I started this thread because the rear winch on my M920 was operating intermittently. I looked at the sight glasses and both of them were white, so I concluded that my problem was lack of hydraulic oil. I checked my transmission fluid level and saw...
After looking through the manuals, I am pretty sure it is a bad seal on the hydraulic pump shaft to PTO. Now the fun begins in finding the seal. It looks to be a Cross pump, Cross seal part number 5A0009.
When I got my M920, it had the transmission and winch oils drained. I filled them both up. Everything thing seemed fine until I tried using the winch to pull out a dozer that was stuck in the mud. The winch started working intermittently. I noticed that the oil level had gone below the lower...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!