• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M

    Fill drilled holes in m1009 roof

    I believe the 3m epoxy was 2500-3000 psi. I would go with a 3m or permatex or versachem brand. The loctite Tinstsr suggested would be great too. If you are good at welding, that would be the best option to fill the holes. I am not, so I went with the epoxy.
  2. M

    Fill drilled holes in m1009 roof

    I just went through this myself. The metal is thin and there are two layers. so welding it can be tricky. It can warp. My family runs a body shop. So we ground off surrounding paint and epoxied the holes shut. Tape was applied inside to catch any flow through. We used a 3m fast cure epoxy and...
110,021members
164,762threads
2,318,089posts
1,139online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks