• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    Hard to start... what say you is the problem?

    Great explanation CAF. You should only need a 10mm deep well socket to remove the glow plugs.(unless you have one that is "swollen") The correct original military glow plug application is a wellman 070. It can be identified (installed) by the terminal width. They have a 3/16" wide terminal...
  2. doghead

    Hard to start... what say you is the problem?

    Realm, get yourself an inexpensive digital volt/ohm meter(HF has one for less than $10). Unplug each wire from the GP's and measure for resistance between the terminal and the hex head area. You should see 1.5 ohms or close to that. If you see 0(no) resistance, than you have a bad GP. test all...
110,021members
164,767threads
2,318,126posts
1,031online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks