Search results

what is the proper adjustment for the kill assembly, and to verify what was the run position.

I will double check to see if it is 180 off this weekend but to the best of our knowledge the motor never got turned while the pump was not in. some times you never know when there is alot of people through your shop.

the crank has 3 timing marks on it and from what I have read they are for differnt applications how do I know which one for sure? then retime the pump is it to the mark on the front portion of the pump or the one toward the back side below the head.

it does have fuel returning to the tank in the return line and we have bleed the injector lines. It runs on starting fluid so I do not think it is a restriction of air. great thoughts keep em coming.

I have had a duece for a year and it does not run on its own. It will run on starter fluid through the intake, but not on it's own. At first the pump was stuck and broken so we had it gone through by a local shop. It ran for a little bit then lost power and stalled. Since then we have had the...

i need help from somebody that knows about injection pumps my duece was stuck from sitting to long before i got it so i had it gone though by a local shop put it back on and it ran for half an hour then quit took the pump back off and brought it in several times they have said now try this or it...

really great information so far I am going to try and spend time on it this week thank you for those that chimed in.

I am very green to this venue and I admit I know enough to be dangerous. That being said I do need help. I recieved a m35a2 1968 model with a 1987 model white engine. I recieceved it not running and found that there was a shaft in the injection pump sheared off where the drive goes from...