• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    MEP-804A Quad fuse problem

    Gentlemen. After downloading the TM Voltage Regulator Test procedure this is what I found. When the meter should have read between 4 and 12 VDC I got 0 VDC On AC Volts what should have read 210-280 VAC I got 20 VAC The ohms test was also a failure and the pot was far from smooth in fact so...
  2. K

    MEP-804A Quad fuse problem

    I will download the TM and work on doing that in the next couple days as time permits. Thanks for your help to this point and I will be back with updates ASAP.
  3. K

    MEP-804A Quad fuse problem

    I at this time not done any trouble shooting on the A1. I am definitely learning as I go on this piece of equipment. The first time I started it up everything seemed fine for the first couple minutes. Then Phase and voltage both dropped off. And before you ask no I did not throw any switches...
  4. K

    MEP-804A Quad fuse problem

    114v so NO
  5. K

    MEP-804A Quad fuse problem

    KTK 3 less than 600v
  6. K

    MEP-804A Quad fuse problem

    I just purchased this gen set and everything seems fine on start up. Untill I release the start switch at which time the quad fuse blows. I see no glaring problems and need some help.
110,153members
164,865threads
2,319,353posts
1,811online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks