• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    Mep-803 -S1 switch broke

    Thank you! Appreciate everyone’s help!! The jumper wires did the trick! Spoke to Jmenede about getting the replacement and spare parts. Thanks again to everyone. 🙏🏻
  2. G

    Mep-803 -S1 switch broke

    S1 switch broke while in prime and run position. Tried to use a pair of pliers to start but the plastic is too worn. Pushed in the emergency stop switch to stop the fuel prime. Any ideas on how to start? Will dead crank start? thank you!
  3. G

    MEP-803 - Fluctuations in Hz - Puerto Rico - HELP!!

    Thank you! I just looked through the lines and believe that the return fuel line is actually cut. I'm going to start replacing it now. Do you believe this would more than likely cause the fluctuations? Thank you for pointing this out. I have had a crash course in generator over the last several...
  4. G

    MEP-803 - Fluctuations in Hz - Puerto Rico - HELP!!

    I believe the video was uploaded. MEP803HZ.mov
  5. G

    MEP-803 - Fluctuations in Hz - Puerto Rico - HELP!!

    The first 2 times I let it run for about 15 mins and then the fluctuations began. After that I have started it several time and about 5 mins later the Hz will start to swing. With 55hz being the lowest and 65 the highest, the dial will sing anywhere between 1/4 to 3/4. I have a short video of it...
  6. G

    MEP-803 - Fluctuations in Hz - Puerto Rico - HELP!!

    A 10kw-Onan-DN4M / LP460, currently has 30 hours of use. Starts up on the first try, however after running for several mins the engine begins to rev up and down, the only gauge that moves is the Hz gauge which swings back and forth over 60hz. This happens whether on or off load. Any input...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks