• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. N

    MEP804a Under Voltage Shut Off?

    Out of curiosity, is this considered a Libby VR? It’s much thinner than the other 2 gensets I have with a TRC VR in them..
  2. N

    MEP804a Under Voltage Shut Off?

    I’m sure it all plays a part.. I’m not too proud to say I have let the generator run until it’s out of fuel on more than one occasion.. My friend gives me free diesel and I do my best to not suck up the bottom of the barrel when I get it.. Most times it’s pretty clean fuel but I can totally see...
  3. N

    MEP804a Under Voltage Shut Off?

    The old filter didn't look bad, but it either must have had contaminates in it to slow down the fuel supply.. I'll take a look in the tank and see..
  4. N

    MEP804a Under Voltage Shut Off?

    I have always stuck my foot in my mouth! My apologies, Comrades?!? Thanks Ladies and Gentlemen! And any other pronouns out there too.. I’ve never been politically correct..:LOL:
  5. N

    MEP804a Under Voltage Shut Off?

    Alright men, I changed my fuel filter and the generator has been running for a good hour now.. I loaded it down and it seems to be back to normal! I appreciate all of the help, insight and brain storming you guys have provided!
  6. N

    MEP804a Under Voltage Shut Off?

    @Guyfang had helped me trouble shoot my alternator not charging a few years ago.. I couldn’t figure out the problem and I’d charge the batteries manually.. Then my friend helped me trace and multimeter the issue.. A diode was blown, and the wire had a break in it.. I have 2 other 804 gensets.. 1...
  7. N

    MEP804a Under Voltage Shut Off?

    It has been some time that I have replaced the fuel filter. I will do that then report back. The VR still shows that’s it’s good, would that be a correct assumption?
  8. N

    MEP804a Under Voltage Shut Off?

    It runs ok until about the 1:33 minute mark when I have someone put load on the genset. I had a video of 4:00 minutes prior to this.
  9. N

    MEP804a Under Voltage Shut Off?

    It’s UnderVoltage then shutting off.. It has like a sputtering like effect as it shuts off. It also has that slightly lower than normal running range. Doesn’t sound like it’s with enough RPM..
  10. N

    MEP804a Under Voltage Shut Off?

    I have double checked the MPU to make sure no shavings we’re stuck on it. Got it to 2.98VDC. It was having trouble starting. It currently starts and runs but will shut off after a minute with load on it UnderVoltage fault light.
  11. N

    MEP804a Under Voltage Shut Off?

    @Guyfang @155mm Does it sound like my VR is bad?
  12. N

    MEP804a Under Voltage Shut Off?

    I've been experiencing issues with my 804a gen set. It has 805 hours on it. Ran good for 3+ years on an intermittent bases powering 3phase equipment. It starts as normal and runs but it sounds like it's not idling/running right, like slightly under powered. I'm very good at tone/pitch when...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks