Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Sounds good. Thanks so much. Tried again not starting it makes sense that plunger must be stuck. Not sure why i had to go through this tapatalk app. I probably need to get back on the SS forum to PM Ray?
Sent from my SM-A505U1 using Tapatalk
Hi, again, pump is definateley getting fuel to ip, cant seem to get it to prime or get past ip to injectors
... keep running batteries down trying to do so .
Sent from my SM-A505U1 using Tapatalk
Guyfang...the linkage seems to be working but when we take off that line off #2 cyl. We are still not getting fuel out?
Sent from my SM-A505U1 using Tapatalk
If thats the large selinoid with the rubber boot on it near the rear of unit then yes it pulls up when cranking and drops back down when not cranking?
Sent from my SM-A505U1 using Tapatalk
Well, hate to admit it but have not fired up this generator since early spring when you all helped me get her going. I dumped the fuel put in fresh but she cranks but will not start? Any ideas out there? Much appreciated.
Sent from my SM-A505U1 using Tapatalk
Thanks guys , i cut the wire to the first capacitor , spliced it w a heat shrink butt connector and whamo , power to fuel pumps and it fired right up and runs great .... Thanks for the great info it saved alot of time
Hello, im new to this however i was reading a thread that mentioned battery becoming disconected and circuit breaker tripping on any switch setting but preheat , controll board light also works ... While running my temp battery setup vibrated loose and terminal came off, now when reconnected...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!